Aufrufe
vor 2 Jahren

Werkstatt-Equipment

LAB MOD SYSTEM 4.5

LAB MOD SYSTEM 4.5 AUTOMATIC LENS GROOVER Lens groover for supra frames FRAME PARTS LAB CONSUMABLES EQUIPMENTS PLIERS TOOLS FOR LENSES FROM Ø 22 TO 54 MM Ref. 05083 Automatic lens groover: • Non corrosive machine body. • Suitable for plastic and glass lenses. • Adjustable groove position (front-central-rear). • Two independent motors for turning the lens and for turning the groove cutting wheel. • No water system required. • Accurate on all profiles. • Diamond groove cutter (Ref. 05081) suitable for glass and CR39 included. • Adjustable groove depth: from 0.0 to 0.7 mm • Groove width: 0.65 mm. • Lens thickness: from 1.5 to 11 mm Size: 170x220x205 mm Weight: 2.7 kg Ref. 05083 Ref. 05083CH Ref. 05083GB PLUG SUPPLIED Ref. 05083AUS GROOVE LOCATOR To set the position of the groove on the lens (front - centre - rear) 230V AC 230V AC 230V AC 230V AC GROOVE DEPTH Dial for setting groove depth in 0.1 mm increments DIAMOND GROOVE CUTTING WHEEL 0.65 mm for glass and CR39 KNOB For the precise positioning of the groove POWER CONSUMPTION 95 WATT LENSES Diamond Groove Cutting Wheel REFRACTION & ORTHOPTIC Ref. 05081 included Diamond groove cutting wheel 0.65 mm for glass and CR39 (made in France) Ref. 05084 Diamond groove cutting wheel 0.65 mm for polycarbonate (made in France) Ref. 05087 Diamond cutting wheel 1,0 mm for glass and CR39, complete with safety cover (made in France) Ref. 05088 Diamond cutting wheel 1,2 mm with safety cover for glass and CR39 (made in France) INDEX 36 ALL RIGHTS RESERVED ©

AUTOMATIC LENS GROOVER 4.5 Instructions for use ALL RIGHTS RESERVED © 05083 05085B Ref. 05085A.63A Centring piece with chain ✔ ✔ Ref. 05085.62 Spring ✔ ✔ Ref. 05085.79 Driving belt for diamond wheel ✔ ✔ Ref. 05085A.19 Driving belt for lens rotation shaft ✔ ✔ Ref. 05085B.17B Lens turning engine ✔ ✔ Ref. 05087.2 Safety cover 1,0-1,2 mm ✔ Ref. 05086 Safety cover 0.65 mm ✔ Ref. 05085.26A Silicone support Ø 20 mm - 2 pcs. ✔ Ref. 05085.26B Silicone support Ø 13,5 mm - 2 pcs. ✔ Ref. 05089 Half-eye frame adapter ✔ Adjusting the groove position CENTRE GROOVE Groove follows centre of edges. • Insert the centre pin between the two guide arms (Picture 1). • Lift setting plate. • Insert the setting pins as illustrated. • Set groove locator to centre position. FRONT CURVE GROOVE: The groove will follow the front curve of the lens. • Remove the centre pin. • Lift the settings plate. • Remove the right setting pin and re-insert it into the setting guide marked “C/F” as illustrated. • Rotate the groove locator counter clockwise. • The distance from the edge depends on the setting of the groove locator. The closest setting from the edge is 0.7 mm. BACK CURVE GROOVE: The groove will follow the back curve of the lens. • Remove the centre pin. • Lift the setting plate. • Remove the left setting pin and re-insert into the setting guide marked “C/R” as illustrated. • Rotate the groove locator clockwise. • The distance from the edge depends on the setting of the groove locator. CENTRING PIN Insert the centring pin between the two guide arms so they move simultaneously. The groove will now be cut in the centre of the lens edge. When the pin is removed the two guide arms will move independently. Centring pin SETTING PINS C/R/F By changing the position of the setting pins to the “R” and “F” guides it is possible to move the groove position to follow the front or the rear lens edge. 37 LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LAB CONSUMABLES LENSES REFRACTION & ORTHOPTIC INDEX

Einfach auf die einzelnen Reiter klicken und durch die verfügbaren Kataloge blättern.


Sollten Sie Produkte aus den Katalogen in unseren Shops nicht finden, nehmen Sie einfach Kontakt mit uns auf - egal ob telefonisch unter +49 6131 97 133 0, im Chat oder per E-Mail. Wir kümmern uns gerne um Ihr Anliegen!


pricon & Partner

COPYRIGHT © 2022 pricon GmbH & Co.KG, ALLE RECHTE VORBEHALTEN.